Advanced Features

❖Receiving Station

The facsimile or computer that received the document from the Transfer Station.

Important

❒ Before you can use this function, you must make the following preparations:

 

1

• Program “G3 Fax No. (Dir.)” in this machine (Requesting Party) and in the

 

 

Transfer Station. For details, see “Administrator Tools” in “Facsimile Fea-

 

 

tures”, General Settings Guide.

 

• Program the same Polling ID in both this machine (Requesting Party) and

 

 

the Transfer Station.

 

•

To send a Transfer Request by fax, the Transfer Station must be a fax ma-

 

 

chine of the same manufacturer and have the Transfer Station function.

 

•

To send a Transfer Request by e-mail, the Transfer Station must be a fax

 

 

machine of the same manufacturer that supports Internet Fax.

 

•

To send a Transfer Request by IP-Fax, the Transfer Station must be a fax

 

 

machine that supports IP-Fax and be made by the same manufacturer.

 

•

The Requesting Party's fax number must be programmed in the Transfer

 

 

Station's Quick Dial or Speed Dial.

 

•

The Receiving Station's fax number must be programmed in the Transfer

 

 

Station's Quick Dial, Speed Dial or Group Dial.

 

❒ You cannot enter Receiving Station numbers directly. The numbers must be stored in destination lists, Speed Dial, or Groups in the Transfer Station(s). To specify a Receiving Station, use the following procedure.

A B

Place the original, and then select any scan settings you require.Specify a Transfer Station.

Enter directly or use a destination list to specify the fax number, e-mail ad- dress, or IP-Fax destination of the Transfer Station.

If you make a mistake, press the {Clear/Stop}key, and then try again.

C Press [Adv. Features].D Press [Transfer Req.].E Press [Receiving Statn].

95