Color Balance—Adjusting and Storing the Color Balance

3Press the [Color Balance Program] key.

4

5

Make sure that the [Recall] key is selected.

Select the setting you want to recall.

Note

Only color balance programs with m contain a color balance.

Color Balance Sample—Sampling the Color Balance

Adjusting the color balance by trial and error could require many copies. The color balance sampling function allows you to produce nine samples on two copies. The first sample of each sheet uses the current color balance (standard). Each sample after that changes one toner color by a fixed number of steps.

Note

The sample will be copied on two A4p, 81/2" 11"p sheets or two A3l, 11" 17"l sheets.

Selecting Color Balance Sample does not reset the adjustments, allowing you to make many samples while progressively changing the balance. The sample might yield a color balance outside the copier’s range which will be reproduced on the sample but not on the copy.

For example, if yellow is already adjusted to +3 and you select Sample ±4, the yellow samples will be copied at yellow +7 and –1, but the adjustment for the final copy cannot be set to +7.

The sampled area is as shown in the illustration.

1: Sampled area

If your machine is Edit type, you can select the sampled area. See page 128.

126