Basic Operation

4Press the [OK] key.

5Set your originals, then press the Start key.

-Scanned color (Only for Edit type)

Note

❐When Single Color copying, Scanned colors might come out lighter.

❐“Scanned color” means that the color is specified from the original image directly.

R

Exposure glass

Display

 

R

GCAREA5E

1Press the [Single Color] key.

2Set your original, then press the [Scanned Color] key.

Note

❐The image of the original is displayed.

3Press the color on the image you wish to scan in with the editor pen.

Note

❐Point to an area of color with a radius of at least 5 mm.

❐To cancel the pointing, press the [Erase] key.

❐For details of this display, ☛ see page 142.

4Press the [OK] key.

Note

❐The color you have chosen is scanned in.

5Press the Start key.

42