Ricoh 6010, 6110 Setting You can Change with the User Tools (System Settings)

User Tools

Setting You can Change with the User Tools (System Settings)

Reference

For how to access the user tools, ☛ see page 187.

System settings

Menu	Description
Panel Tone	The beeper (key tone) sounds when a key is pressed. This beeper can be turned on or
	off.
	Note
	❐ Default: On
Ready/Tone	Choose whether the machine beeps when it becomes ready for a copy run after power
	up.
	Note
	❐ Default: On
	❐ When the “Panel Tone” is set to Off, the beeper does not sound even if the “Ready/
	Tone” is set to On.
Copy Count Display	The copy counter can be set to show the number of copies made (Up), or the number
	of copies remaining to be made (Down).
	Note
	❐ Default: Up
Auto Timer	The machine turns itself off automatically to conserve energy after your job is finished,
	after the selected time. This function called “Auto Off”. The time can be set from 1 to
	120 minutes.
	Note
	❐ Default: 60 minutes
Control Panel Off Timer	The machine enters Energy Saver mode automatically after your job is finished, after
	the selected time. The time can be set from 10 to 990 seconds, or off. In Energy Saver
	mode, the panel display turns off.
	Note
	❐ Default: On (60 seconds)
System Reset Timer	The machine returns to its prioritized mode automatically after your job is finished, after
	the selected time. This function is called “System Reset”. The time can be set from 10
	to 990 seconds, or no system reset.
	Note
	❐ Default: On (60 seconds)
	❐ You can specify the prioritized mode with the “Function Priority” user tool. ☛ See
	above.
Function Reset Timer	When the “Interleave Print” is set to On, the machine turns the default mode (Copier or
	Printer) automatically after your job is finished, after the selected time. The time can be
	set from 10 to 990 seconds.
	Note
	❐ Default: On (60 seconds)
	❐ The optional printer is required to use this function.

Changing the Machine’s Settings

191