
Selecting the Film Type and Performing Shading
35mm Strip Negative
1Press the [Shading] key.
2Insert the “N” (Negative) filter in the left slot as shown in the illustration.
Note
❐Be careful to insert the filter as shown, not the other way around.
❐Before going to the next step, make sure that the fresnel lens is lowered in position.
1
TRSR0F0E
1: Filter
3Set the base film in the holder.
Reference
Regarding setting the base film, ☛ see page 217.
4Open the film cover and while pressing the holder lever to the left, insert film strip holder the right slot.
5Insert the holder until the ★ mark is placed as shown in the illustration.
1
TRSR0J0E
6Press the [Shading] key.
Note
❐The machine will start shading automatically.
224