Selecting the Film Type and Performing Shading

Negative Film on Glass

1Press the [Shading] key.

2Insert the “N” (Negative) filter in the left slot as shown in the illustration.

Note

❐Be careful to insert the filter as shown, not the other way around.

3Cut the positioning sheet to match the film size.

Reference

Regarding the positioning sheet, ☛ see page 219.

4Place the positioning sheet under the mirror unit (on the exposure glass).

Note

❐Place the marked corner of the film position sheet at the rear left corner of the exposure glass.

❐Before going to the next step, make sure that the fresnel lens is lowered in position.

5Set the base film in the film strip holder.

❐Regarding setting the base film, ☛ see page 217.

6Open the film cover and while pressing the holder lever to the left, insert the film strip holder in the right slot.

7Insert the holder until the ★ mark is placed as shown in the illustration.

1

TRSR0F0E

1: Filter

1

TRSR0G0E

1. Positioning sheet

TRSR0Y0E

1

TRSR0J0E

1: Holder lever

226