Operation Panel
Operation Panel
isit
Where it is & what
1.Screen Contrast knob
You can change the brightness of the display.
2.Special Accessory key
Press to use the optional film projector unit. ☛See page 207.
3. User Tools key
Press to change the default setting.
☛See page 187.
4.Adjustment/Memory key
Press to adjust the image or color balance, or to make user colors. ☛ See page 123.
5. Program key
Press to select the program mode.
☛See page 57.
6.Editor pen
Use to designate areas.
7.Recall key
Press to recall the previously selected copy jobs.
8. Energy Saver key
Press to enter/exit the Energy Saver mode. ☛See page 55.
9. Clear Modes key
Press to clear the previously entered settings.
10.Interrupt key
Press to make interrupt copies.
☛See page 55.
11. Counter key
Press to display the total number of copies made.
12.Main Power indicator
This indicator lights up when the main power switch is turned on, and goes off when the switch is turned off.
13.On indicator
This indicator lights up when the operation switch is turned on, and goes off when the switch is turned off.
14.Operation switch
Press this switch to turn the power on (the On indicator lights up). To turn the power off, press this switch again (the On indicator goes off).
15.Clear/Stop key
Press to cancel the copy number entered. While copying, press to stop copying. This key is also used to clear data.
16. Start key
Press to start copying.
17. # key
Press to enter data in selected modes.
18. Number keys
Use to enter the desired number of copies. They are also used to enter data.
19. Touch panel display
You can see the operation status and messages here.
5