BLoading Paper

BLoading Paper

Reference

Regarding paper sizes that can be set, ☛ see page 238.

Note

❐If you want to change the paper size, ☛ see page 184.

Non-recommended Paper for Paper Trays

❐Folded, curled, creased, or damaged paper

❐Torn paper

❐Perforated paper

❐Paper with conductive or low electrical resistance coating such as carbon or silver coating

❐Thermal paper, art paper

❐Thin paper that has low stiffness

❐Damp paper

❐Wavy paper

❐Stapled paper

❐Translucent paper

❐OHP transparencies

Note

❐Load paper with the side you wish to copy onto face-down in the paper trays. If copies are curled, try turning the copy paper over in the tray. If there is no improvement, change to copy paper with less curl.

❐Correct curls in copy paper before loading.

❐Fan copy paper to get air between the sheets before loading.

❐When making 2-sided copies, do not load paper in the paper tray to copy on the reverse side. Use the bypass tray. ☛ See page 52.

Loading Paper in the Paper Tray

1Pull out the paper tray until it stops.

2While pressing the lock lever, open the side fences.

172