
Checking and Changing Areas
Checking and Changing Areas
Use this function to check the areas you have selected and the modes you have chosen for each area.
You can:
•Change the modes for an area/Group
•Add an area to a Group
•Erase an area
•Erase a Group
Note
❐Note that even if you erase a job setting, a group, or an area, they still consume memory until you exit Area Editing.
Change Modes
1Press the [Confirm Areas] key.
Note
❐All designated areas are displayed.
2Select an area or a group.
Note
❐Areas in this group are highlighted.
3Press the [Change Setting] key.
Editing | Edit Type) |
Area | (Only for |
|
|
159