Reduce/Enlarge—Reducing and Enlarging

Directional Size Magnification (inch)—Stretching and Squeezing the Image into the Copy Area

1

3

2

4

GCDHEN2E

1:Horizontal original size

2:Vertical original size

3:Horizontal copy size

4:Vertical copy size

The suitable reproduction ratios will be automatically selected when you enter the horizontal and vertical lengths of the original and copy image you require.

Note

❐You can enter sizes within the following ranges:

Metric Version 1 - 999mm (in 1mm steps)

Inch Version 0.1" - 99.9" (in 0.1" steps)

❐If the calculated ratio is over the maximum or under the minimum ratio, it is corrected within the range of the ratio automatically. However, with some ratios, parts of the image might not be copied or blank margins might appear on copies.

1Press the [Reduce/Enlarge] key.

2Press the [Directional Mag.] key.

3Press the [D. Size Mag. (inch)] key.

4Enter the horizontal original size with the Number keys, then press the [#] key.

Note

❐To change the value entered:

•If you have not pressed the [#] key yet, press the [Clear] key and enter a new value.

•If you have already pressed the [#] key, select the specified key and enter the a value.

5Enter the horizontal copy paper size with the Number keys, then press the [#] key.

6Enter the vertical original size with the Number keys, then press the [#] key.

7Enter the vertical copy paper size with the Number keys, then press the [#] key.

8Set your originals, then press the Start key.

64