
Basic Operation
Energy SaverIf you do not operate the machine for a certain period after copying or press the Energy Saver
key, the display goes out and the machine enters Energy Saver mode. When you press the
Energy Saver
key again and originals are set in the document feeder or when the platen cover or document feeder is opened, the machine returns to the ready condition. In Energy Saver mode, the machine uses less electricity.
1Press the Energy Saver
key to enter the En- ergy Saver mode.
Note
❐ To cancel this mode, press the Energy Saver
key again.
Use the Interrupt
key to interrupt a copy run and make urgently needed copies.
Reference
For functions that cannot be used together with this function, ☛ see page 106.
1Press the Interrupt
key. The machine will stop the copy run and store the present settings in the memory. The machine will return to the ready
condition.
Copying
2Remove the previous originals. Set your original for interrupt copying on the exposure glass (platen glass) or in the document feeder.
3Make your copies.
4After interrupt copying is completed, press the Interrupt
key again. The machine will recall the previous copy settings.
5 Reset the previous originals and press the Start
key to resume the previous run.
55