Basic Operation

6Set your originals, then press the Start key.

Copying onto non-standard size paper with the bypass tray

Preparation

You can register non-standard paper sizes you use often in keys [Custom1], [Custom2], and [Custom3] with the user tools. ☛ See page 193.

Note

❐Be sure to set the size. Otherwise, a paper misfeed might occur.

1Open the baypass tray.

2Press the [Normal Paper], [Thick], [Extra Thick], or [OHP] key.

3Press the [Custom Size] key.

4Select [Custom1], [Custom2], [Custom3] or [Enter Size] keys.

Note

❐If you select [Custom1], [Custom2], or [Cus- tom3], go to step 7.

5If you select [Enter Size] in step 4, enter the horizontal paper size with the Number keys, then press the [#] key.

Note

❐To change the value entered, press the Clear/ Stop key and enter a new value.

6Enter the vertical paper size with the Number keys, then press the [#] key.

7Press the [OK] key.

50