
Designating Areas
5Press the [Fix Selection] key.
6Press the [Area Edit] key, specify your settings, then press the [OK] key.
Reference
For details, ☛ see page 152.
7Press the Start
key.
Limitation
❐If you specify an area with
1Set your original on the exposure glass.
2Press the [Area Editing] key.
3Press the
4Press on a point inside the exterior area you wish to specify.
5Press on a point inside the interior area you wish to treat differently.
Note
❐Be sure to select a point inside of the exterior area you wish to define.
6Press the [Confirm Selection] key.
7Press the [Area Edit] key, specify your settings, then press the [OK] key.
Reference
For details, ☛ see page 152.
8Press the Start
key.
Editing | Edit Type) |
Area | (Only for |
|
|
147