
Designating Areas
Right Angle Polygon and Polygon
1
2
Set your original on the exposure glass.
Press the [Area Editing] key.
3Presskey. the (R.A. Polygon) or
(Polygon)
4Mark the first point with the editor pen.
5Mark the next points.
Note
❐When you use Right Angle Polygon mode, mark points that make right angles.
6After making the last point, press the [Confirm Selection] key.
7Press the [Area Edit] key, specify your settings, then press the [OK] key.
Reference
For details, ☛ see page 152.
8Press the Start
key.
Closed Loop
Limitation
❐If you specify an area with Closed Loop, you cannot specify any additional areas with other selection tools.
Note
❐When you color areas with the Closed Loop, the area boundary may shift depending on the image.
1
2
3
4
Set your original on the exposure glass.
Press the [Area Editing] key.
Press the (Closed Loop) key.
Touch on a point inside a closed loop.
146