
What to do If Something Goes Wrong
What to do if Something Goes Wrong
1. If the color balance is not right
❐If the color density leans to red or blue, or isn’t properly balanced, perform the color density adjustment, and the color balance adjustments for Yellow, Magenta, and Cyan. ☛ See page 124.
2. If the film you want to copy does not match the types of base film included.
❐ If you do not plan on copying from this type of film often, use an unexposed frame of the same film strip, if available, when performing shading.
TRSR1A0E
❐ If you plan on copying from this type of film often, make a base slide using an unexposed, developed frame of the film.
1
2
TRSR0S0E
1: Unexposed part
2: Mount
❐If you have no blank unexposed frame of the same type of film, you can use an unexposed frame from film produced by the same company, but the colors might differ a bit.
3. If the copy image is out of focus.
❐Check if the image on the film is focused or not. If it is, make sure the film is correctly set in the holder.
❐If you reset the film correctly in the holder and the image is still out of focus, or if you use a different image, and the copy image is out of focus in every case, please call your service representative.
❐You can adjust the focus manually with the focusing lever. ☛ See page 228.
4. If the edge of the original image does not appear on the copy.
❐Check the size of the area that can be copied. ☛ See page 212.
❐When setting film in the holder, be sure to position the desired frame properly.
❐To extend the area that can be copied, use the glass mount film holder and focus manually.
5. If the projection lamp does not light.
❐If the projection lamp does not light and a service message appears on the screen, the lamp might be burned out. In this case, please call you service representative.
6. If you move the mirror unit.
❐Perform the shading operation once again.
234