
Preparing the Film
Selecting the Base Film (If Needed) Note
❐When you use negative film for copying, use that film’s appropriate base film for shading.
1Confirm the manufacture, model name, and ASA rating of the film you want to use.
2Select a base film suitable for the film to copy.
Note
❐The following base film slides have been prepared as accessories.
•For FUJICOLOR (registered trademark of FUJI PHOTO COMPANY LIMITED.)
•For AGFA (registered trademark of AGFAGEVAERT AG.)
•For KODAK (registered trademark of EASTMAN KODAK COMPANY.)
❐If you use film that does not have suitable base film, you should make the base film yourself. ☛ See page 234.
3Open the film strip holder and set the base film in the film strip holder.
Note
❐ The base film must be set sideways in the strip holder.
❐ There is no difference between both sides of the base film.
1
TRSR0H0E
1: Base film
4Close the holder and lock it as shown in the il- lustration.
Projector Unit Operation
217