Designating Areas
7.Enlarge
Enlarge 4
Enlarge by about 528% Enlarge 3
Enlarge by about 394% Enlarge 2
Enlarge by about 264% Enlarge 1
Enlarge by about 200% Full Image
Note
❐After pressing the [Enlarge] key, mark a point in the displayed image to zoom in on.
8.Basic Settings
Change the job settings for the entire image.
9.Outside Area
Set modes for outside areas.
10.Area Edit
Edit inside the area.
11. Confirm Areas
Show selected areas, modes, and groups.
12.Confirm Selection
Complete a designated area.
13.Erase
Cancel last point selected.
14. Arrow keys
Move cursor in small steps.
15. Scroll key
Move the portion of the original.
Note
❐Do not press the touch panel display with any hard or sharp object. Always use the editor pen.
❐When you mark a point with the editor pen, the cursor position might not be quite right. In this case, move the cursor in small steps by pressing the arrow keys on the display.
Editing | Edit Type) |
Area | (Only for |
|
|
143