Selecting the Film Type and Performing Shading

35mm Slides Positive

1Press the [Shading] key.

Open the film cover and insert the “P” (Posi-

 

2 tive) filter firmly in the left slot as shown in the

1

illustration.

Note

❐ Be careful to insert the filter as shown, not the other way around.

❐ Before going to the next step, make sure that fresnel lens is lowered in position.

TRSR0F0E

1: Filter

3Press the [Shading] key.

❐The machine will start shading automatically.

4Set the film (slide or strip) in the holder.

Reference

Regarding setting the film, ☛ see page 218.

5While pressing the holder lever to the left, insert the holder in the right slot.

Projector Unit Operation

TRSR0Y0E

6 Adjust the holder by sliding it up and down to position the correct frame for copying.

2

1

TRSR0N0E

221