
Setting
Setting Non-standard Sized Originals
When copying from
Limitation
❐You must set your
Reference
For the standard sizes the machine can detect, ☛ see page 30.
Note
❐The dimensions you can enter must be within the following ranges:
Vertical size | 50 - 297mm (in 1mm steps), 2.0" - 11.7" (in 0.1" steps) |
Horizontal size 50 - 432mm (in 1mm steps), 2.0" - 17" (in 0.1" steps)
1
2
Select the copy paper size.
Press the [Custom Size Orig.] key.
Basics
[Custom Size Orig.] key
3Make sure that the [Orig. Horiz.] key is selected. Enter the horizontal size with the Number
keys, then press the [#] key.
Note
❐To change the value entered, press the [Clear] key and enter a new value.
4Press the [Orig. Vert.] key and enter the verti- cal size with the Number
keys, then press the [#] key.
5Press the [OK] key.
6Set your original on the exposure glass (platen glass), then press the Start
key.
35