1Open the bypass tray.

2Insert the paper into the bypass tray.

Note

❐Make sure the front side (the side that has been cop- ied onto) faces down.

3Press the [Duplex Back] key.

Note

❐When you copy onto non-standard size paper, press the [Custom Size Orig.] key and select or enter the size. For details, ☛ see page 50.

4Press the [OK] key.

5Adjust the paper guides to the paper size.

Note

❐Make sure that the paper guides match the paper size. If the paper guides are not adjusted to the pa- per size properly, paper might be skewed or a paper misfeed might occur.

6Set your originals, then press the Start key.

Basic Operation

Copying

53