
Selecting Modes for Designated Areas
Selecting Modes for Designated Areas
Reference
The available modes for area editing depend on the area shape. ☛ See page 164.
For functions that cannot be used together in area editing, ☛ see page 164.
More than one mode can be set for designated area, however, there are some limitations, ☛ see page 164. And up to 7 patterns of modes can be set together.
Note
❐Up to 20 groups of multiple areas can be edited. All the areas should belong to groups 1 ~ 20.
You can select up to seven job patterns for at most 20 groups. After you have set seven patterns, the copier will only allow you to choose the pattern of a previous group.
If you change the settings for one group, it will change the settings for all other groups with the same job pattern. However, if you have set a Paint, Color Background, or Frame/ Line, changing the color in one group will not affect other groups. (Up to 15 colors can be selected.)
❐The modes that can be set for inside areas as follows:
•Color/Image Adjustment: Image Density, Color Mode, Original Type, Image Adjustment, Color Adjustment, Color Balance Adjustment
• | Color Creation: | Color Conversion, Color Erase, Color Background, Paint, Type Mask |
• | Image Creation: | Outline Image, Shadow Image, Slanted Image, Mirror Image, Positive/Negative |
Note
❐The editing functions available when specifying area with Frame/Line mode are Width and Color.
❐Color/Image Adjustment’s default setting:
•Image Density - Manual Image Density
•Color Mode - Black
•Original Type - Text
❐You can change the default settings. ☛ See page 187.
❐Depending on the shapes of the areas, coloring or deleting near the outlines of the areas might not do well, or the outlines might become uneven.
❐The way to set modes is basically the same as for the entire image. For details, refer to each page.
•To fill an area with a selected color, select the Paint.
•Image Density ☛ See page 39.
•Original Type ☛ See page 44.
•Color Adjustment ☛ See page 131.
•Color Conversion ☛ See page 85.
•Type Mask ☛ See page 89.
•Color Background ☛ See page 88.
•Outline Image ☛ See page 91.
•Slanted Image ☛ See page 95.
•Positive/Negative ☛ See page 101.
•Color Mode ☛ See page 40.
•Image Adjustment ☛ See page 132.
•Color Balance Adjustment ☛ See page 124.
•Color Erase ☛ See page 87.
•Shadow Image ☛ See page 92.
•Mirror Image ☛ See page 96.
•Save Area ☛ See page 154.
•Changing Job Settings for the Entire Image ☛ See page 158.
•Change Modes ☛ See page 159.
•Adding Areas ☛ See page 160.
•Erasing a Group ☛ See page 162.
Area Shapes
Basic modes
1Designate the areas you wish to modify.
Note
❐For designating areas, ☛ see page 145.
152