Setting one Original at a Time in the Document Feeder
Setting one Original at a Time in the Document Feeder
If you set one original at a time in the document feeder, the second and subsequent originals can be fed and copied automatically without pressing the Start key.
Note
❐Do not press down or hold originals after inserting them.
❐While originals are fed from the original table to the exposure glass (platen glass), do not pull them out.
❐Do not lift the document feeder until the original has been completely fed out.
1Correct any curl, fold, or crease in the originals before setting.
2Make sure the Insert Original indicator is lit and the exposure glass (platen glass) is clear of origi-
nals.
3 Adjust the guide to the original size. | TRSR050E |
|
4Set the original face up into the document feeder until the Insert Original indicator goes off.
Note
❐If you are copying a stack of originals one sheet at a time and you want to keep them in order, start with the last page of the originals.
❐The original guide must touch the front side of the original.
5Press the 
Start
key.
6While the Auto Feed indicator is lit after an origi- nal is fed, set the next original. The original is
automatically fed and copied.
Note
❐ You can adjust the time the machine waits before being ready for the next original with the user tools. ☛ See page 191.
Basics
33