eRemoving Jammed Staples
eRemoving Jammed Staples
Note
❐Staples might be jammed because of curled copies. In this case, try turning the copy paper over in the tray. If there is no improvement, change to copy paper with less curl.
❐After removing jammed staples, staples might not be ejected the first few times you try to use the stapler.
1Open the sorter stapler front cover, then turn the dial in the arrow direction until the staple unit stops.
2 Push the R3 holder and pull out the staple unit.
3 Push the cartridge forward to release it.
4 Pull out the cartridge.
5Push the lock on the right side of the phase plate to open the phase plate.
if Something | Wrong |
to do | Goes |
What |
|
|
|
6Remove the jammed staple.
181