Basic Operation
Copying onto standard size paper with the bypass tray
Note
❐When you copy onto the reverse side of paper that has been already copied onto, ☛ see page 52.
1Open the bypass tray.
2Press the [Normal Paper], [Thick], [Extra Thick], or [OHP] key.
Note
❐Make sure that the [Standard Size] key is selected.
❐When you copy onto OHP transparencies, you can select whether a blank slip sheet is inserted between OHP tranparencies.
Copying
3Press the [OK] key.
4Adjust the paper guides to the paper size.
Note
❐Make sure that the paper guides matches to the pa- per size. If the paper guides are not adjusted to the paper size properly, paper might be skewed or a pa- per misfeed might occur.
❐With large copy paper (more than A4l, 81/2" ⋅ 11"l), swing out the extender.
5With the side you wish to copy onto face up, in- sert the paper into the bypass tray until it stops.
1:Horizontal size 2:Vertical size 3:Extender
Note | 4:Paper guides |
❐The paper size is displayed.
49