xClearing Misfeeds

xClearing Misfeeds

RCAUTION

When removing misfed paper, do not touch the fusing section because it could be very n hot.

Note

When clearing misfeeds, do not turn off the operation switch. If you do, your copy settings are cleared.

To prevent misfeeds, do not leave any torn scraps of paper within the machine.

If paper misfeeds occur repeatedly, contact your service representative.

When clearing misfeeds, make sure that all units and levers are returned to their original position and all covers are closed.

Do not touch originals in the document feeder when a paper misfeed occurs in the machine. If you do the machine cannot determine which originals have been copied and which haven’t.

Check the Misfeed Location Display

The display shows the location of misfed paper.

Clearing Paper Misfeeds

When A, B, C, D or Z is Displayed:

1Open the front cover of the machine.

2You can find the sticker (with b at the top) ex- plaining how to remove misfed paper inside the front cover as shown in the illustration.

3Remove misfed paper following the instructions on the sticker.

if Something

Wrong

to do

Goes

What

 

 

 

177