3-7

If 3 PPPoE is selected ??????????????

Setting IP Manually

If ‘1.Manual IP’ is selected in Mode, sub menu 2 to 4 will be displayed on the LCD panel.

Network (2/4) 1.Mode

2.IP

3.Netmask

4.Gateway

The user may directly enter the IP address, subnet mask, and gateway, address as follows:

If the ‘2.IP’ menu is selected, the LCD panel will show the following message and the user can enter the ITP phone’s IP address.

*Input IP Address

xxx.xxx.xxx.xxx

Check if there is any currently saved IP address of the phone on the LCD panel. If the IP address has not been set, the LCD panel shows nothing. The user can enter the IP address by using the dial buttons and [*] button to enter ‘.’. After the correct IP address has been entered press the [Enter] button to save the setting.

If the ‘3.Netmask’ menu is selected, the LCD panel will show the following message and the user can enter a new Netmask IP address.

*Input Netmask

xxx.xxx.xxx.xxx

Check if there is any currently saved subnet mask address of the phone on the LCD panel. If the subnet mask address has not been set, the LCD panel will show nothing. Enter the Netmask using the dial buttons and [*] button to enter ‘.’. After

Page 43
Image 43
Samsung ITP-5012L manual Setting IP Manually