Samsung SCX-5115, SCX-5315F/5115 manual System Setup from the one, Press Mode/Enter Enter on

Condition	Probable cause	Suggested solutions
		Change the USB mode to “SLOW.”
		To do so, take the following steps:
		1. Press Menu/Exit then
		System Setup from the one-
		touch dial keypad. SCX-5115
		users should press Menu then
		Enter.
When printing	When the USB mode is	2. Use	or	until “USB MODE”
using the USB	set to “FAST” some PC
		appears on the top line of the
connection, an	users may experience
		display. The current setting
error occurs	poor USB
		appears on the bottom line.
repeatedly.	communication.
		3. Press	or	to select “SLOW.”
		4. Press Mode/Enter (Enter on
		SCX-5115) to save the
		selection.
		5. Press Stop/Clear to return to
		Standby mode.
		If your computer is equipped with
	The computer parallel	an ECP parallel port, enable this
	port may not be set for	mode of operation. Refer to the
	high speed	Enabling High Speed Printer
	communications.	Communications section and your
		computer’s user guide.
		Point to the Start and then click
		Settings then Printers. Click
Printing is too	If using Windows 95,	your printer icon with the right
slow.	the spool setting may	mouse button. Click Properties
	be set incorrectly.	and then spool settings on the
		Details tab. Select the desired
		setting from the available choices.
	Computer may not have	Install more RAM in your computer.
	enough memory (RAM).
	The print job is large.	Reduce resolution from 600 dpi to
		300 dpi.

8.16 TROUBLESHOOTING