Using Save Modes
Toner Save | 1 |
The Toner Save feature allows the printer to use less toner on each page. Activating this mode extends the life of the toner cartridges up to twice as long as in normal mode, but reduces the print quality.
To turn the Toner Save mode on, take the following steps:
1Press SAVE Toner. The display shows the current setting on the bottom line.
2Press SAVE Toner or use the navigation buttons to change the setting.
To enable the Toner Save mode on, select “ON.” The button backlight is on. To disable the mode, select “OFF.” The button backlight is off.
3Press Mode/Enter (Enter for
Paper Save
This feature prints 2 pages on a single sheet to save paper. To turn this feature on, take the following steps:
1Press SAVE Paper. The display shows the current setting on the bottom line.
2Press SAVE Paper or use the navigation buttons to change the setting. To enable the Paper Save mode, select “ON.” Or select “OFF” to disable the mode.
3Press Mode/Enter (Enter for
NOTES:
•The Paper Save mode is available only when the document is loaded in the ADF.
•The Paper Save mode is disabled when you set the collation or duplex copy options.
