
Power Save
The Power Save mode allows the printer to reduce power consumption when it is not in actual use. To turn the Power Save mode on, take the following steps:
1Press SAVE Power. The display shows the current setting on the bottom line.
2Press SAVE Power or use the navigation buttons to change the setting. To enable the Power Save mode, select “ON.” Or select “OFF” to disable the mode.
3Press Mode/Enter (Enter for
You can further select the length of time the machine waits after a job is printed before it switches to a reduced power state.
1Press Menu/Exit and then System Data from the one- touch dial keypad.
2Press or
until “POWER SAVE” appears on the display. Make sure that “ON” blinks on the bottom line.
If necessary, use or
to select “ON” and press Mode/ Enter (Enter for
3The available time settings appear on the display and the current setting blinks. The available options are 5, 10, 15, 30, and 45 (minutes). Press or
until the desired time blinks.
4Press Mode/Enter (Enter for
5To return to Standby mode, press Stop/Clear.