Making Copies from the Automatic Document Feeder
Using the ADF (Automatic Document Feeder), you can load up to 30 documents (20lb, 75 g/m2) in one job. Ensure that documents are in good condition, that they have the same thickness and weight, and that all of the staples and paper clips have been removed.
1Feed the documents (up to 30 pages) face up into the ADF and adjust the document guides to the document size. Make sure that the bottom of the document stack matches the paper size marked on the ADF.
4
Document guides 
2
Copy size |
|
|
|
|
| Number of copies |
|
|
|
|
|
Note that you cannot make copies in Fax mode. The machine will sounds an error beep.
3Make sure that you have selected the required paper tray. See page 4.2.
4Customise the copy settings including the number of copies, copy size, contrast and image type using the control panel buttons. See “Setting Copy Options” on page 4.6.
To clear the settings, use the Stop/Clear button.
5If necessary, you can use special copy features, such as collation and duplex copying.
COPYING 4.3
