Installing a Network Interface Card
To install an optional network interface card, take the following steps:
CAUTIONS:
•DISCONNECT THE POWER CORD. Never remove the control board while the printer is plugged in. To avoid the possibility of an electrical shock, always disconnect the power cord when installing or removing ANY printer options.
•DISCHARGE STATIC ELECTRICITY. The control board and the interface card are sensitive to static electricity. Before installing or removing the card, discharge static electricity from your body by touching something metal, such as the metal back plate on any device plugged into a grounded power source. If you walk around before finishing installation, discharge any static electricity once again.
1Unpack the network interface card. Make sure that there is no missing or damaged part.
Network | SyncThru |
Interface Card | and User’s Guide |
2Turn your machine off and unplug the power cord and all of cables from the machine.
3Remove the six screws from the back of the machine.
A.2 INSTALLING A NETWORK OPTION
