ENGLISH ESPAÑOL
2323
✤Clock setup works in <Camera>/<Player>/<M.Cam>/<M.Player>
modes. ➥page 19
✤The Date/Time is automatically recorded onto a tape. Before
recording, please set the <Date/Time>. ➥page 30
1. Set the [Power] switch to [CAMERA] or
[PLAYER].
2. Set the [Mode] switch to [TAPE]or [MEMORY].
3. Press the [MENU] button.
■The menu list will appear.
4. Move the [Zoom] lever up or down to select
<System>, then press the [OK] button.
5. Move the [Zoom] lever up or down to select
<Clock Set>, then press the [OK] button.
■The year will be highlighted first.
6. Move the [Zoom] lever up or down to set
current <Year>, then press the [OK] button.
■The month will be highlighted.
7. You can set the month, day, hour and minute
following the same procedure
after setting the year.
8. Press the [OK] button after setting the minutes.
■Amessage <Complete !> is displayed.
■To adjust the clock, select the Year, Month, Day,
Hour or Min by pressing the [OK] button, then
move the [Zoom]lever up or down to set
respective values.
9. To exit, press the [MENU] button.
[ Notes ]
■After the Lithium Battery loses its charge (after
about 6 months), the date/time appears on the
screen as <00:00 1.JAN.2006>.
■You can set the year up to 2037.
■If the Lithium Battery is not installed, any input data
will not be backed up.
✤La configuración del reloj está operativa en los modos <Camera>
(Cámara)/<Player>(Modo Player)/<M.Cam>(Modo M.Cam)/
<M.Player>(Modo M.Play). ➥pág. 19
✤La fecha y la hora se graban de manera automática en la cinta.
Antes de grabar, fije la fecha y hora. ➥pág. 30
1. Coloque el interruptor [Power] en [CAMERA]o
[PLAYER].
2. Coloque el interruptor [Mode] en [TAPE] o
[MEMORY].
3. Pulse el botón [MENU].
■Aparecerá la lista de menús.
4. Mueva la palanca [Zoom] arriba o abajo para
seleccionar <System> (Sistema)y pulse el
botón [OK].
5. Mueva la palanca [Zoom] arriba o abajo para
seleccionar <Clock Set> (Ajuste Reloj) y pulse el
botón [OK].
■Primero aparecerá resaltado el año.
6. Mueva la palanca [Zoom] arriba o abajo para
ajustar el<Year> (Año) actual y pulse el
botón [OK].
■Se resaltará el mes.
7. Fije el mes, día, hora y minutos siguiendo el mismo
procedimiento tras ajustar el año.
8. Pulse el botón [OK] tras ajustar los minutos.
■
Aparece el mensaje <Complete !> (Completo !).
■Para ajustar el reloj, seleccione el año, mes, día,
hora o minuto presionando el botón [OK] y
mueva la palanca[Zoom] arriba o abajo para
ajustar los valores respectivos.
9. Para salir, pulse el botón [MENU].
[Notas]
■Una vez que la batería de litio pierda su carga
(después de 6 meses aproximadamente), la fecha
y hora aparecen en pantalla como <00:00
1.JAN.2006>.
■Puede definir el año hasta 2037.
■Si no se instala la batería de litio, no se memorizará ningún
dato introducido.
Initial Setting : System Menu Setting
Ajuste inicial:
ajuste del menú Sistema
Setting the Clock (Clock Set) Ajuste del reloj <Clock Set> (Ajuste Reloj)Adjust Select Exit
MENUOKZOOM
Camera Mode
Back
Clock Set
Remote
Beep Sound
Language
Demonstration
1 JAN 2006
00 : 00
…
†
Move Select Exit
MENUOKZOOM
Camera Mode
Back
Clock Set
Remote
Beep Sound
Language
Demonstration
1 JAN 2006
00 : 00
Complete !
Camera Mode
√System
Clock Set
Remote
Beep Sound
Language
Demonstration
√On
√On
√English
√On
Move Select Exit
MENUOKZOOM
4
5
8
01040F VPD963 UK+ESP~042 9/21/06 2:36 PM Page 23