ENGLISH ESPAÑOL
3737
Basic Recording Grabación básica
Searching quickly for a desired scene (Setting the ZERO MEMORY) Búsqueda rápida de una escena (ajuste de Zero Memory (Memoria cero)) ✤The ZERO MEMORYfunction works in both <Camera> and
<Player>modes. ➥page 19
✤You can mark a point on a tape that you want to return to following
playback.
1. Set the [Power] switch to [CAMERA] or [PLAYER].
2. Set the [Mode] switch to [TAPE].
3. Press the [ZERO MEMORY] button on the remote
control before the recording or during playback at the
point where you wish to return.
■The time code is changed to a tape counter that
is set to ZERO MEMORY with the < 0:00:00>
(ZERO MEMORYindicator).
■If you want to cancel the ZERO MEMORY
function, press the [ZERO MEMORY] button
again.
4. Finding the zero position.
■When you have finished playback, fast forward or
rewind the tape in stop mode.
The tape stops automatically when it reaches the
zero position.
■When you have finished recording, set the
[Power]switch to [PLAYER] and press the
[œœœœ (REW)] button.
The tape stops automatically when it reaches the
zero position.
5. The tape counter with the <>(ZERO MEMORY indicator)
disappears from the display and the tape counter is changed to the
time code.
[ Notes ]
■In the following situations, ZERO MEMORY mode may be cancelled
automatically:
- At the end of the section marked with the ZERO MEMORY
function.
- When the tape is ejected.
- When you remove the Battery Pack or power supply.
■The ZERO MEMORYmay not function correctly where there is a
break between recordings on the tape.
✤La función ZERO MEMORYestá operativa en los modos
<Camera>(Cámara) y <Player>(Modo Player). ➥pág. 19
✤Esta función permite marcar un punto de la cinta al que quiera
regresar después para ver la grabación.
1. Coloque el interruptor [Power] en [CAMERA] o
[PLAYER].
2. Coloque el interruptor [Mode] en [TAPE].
3. Pulse el botón [ZERO MEMORY] del control
remoto durante la reproducción o antes de grabar
en el punto al que desee regresar.
■El código de tiempo se convierte en un contador
de cinta que se ajusta en ZERO MEMORY con
el indicador < 0:00:00 > (indicador de ZERO
MEMORY).
■Si desea cancelar la función de memoria cero,
pulse de nuevo el botón [ZERO MEMORY].
4. Búsqueda de la posición cero.
■Cuando haya acabado de ver la cinta,
adelántela o rebobínela en el modo de parada.
La cinta se detiene automáticamente cuando
llega a la posición cero.
■Cuando haya acabado de grabar, ajuste el
interruptor[Power] en la posición [PLAYER] y
pulse el botón [œœœœ (REW)].
La cinta se detiene automáticamente cuando
llega a la posición cero.
5. El contador de la cinta con <>(indicador de memoria cero)
desaparece de la pantalla y vuelve a aparecer el código de tiempos.
[ Notas ]
■La memoria cero se puede cancelar de manera automática en los
siguientes casos:
- Al final de una sección marcada con la función ZERO MEMORY.
- Al extraer la cinta de la videocámara.
- Al desconectar la videocámara o quitar la batería.
■Es posible que la función ZERO MEMORY no funcione de manera
adecuada cuando haya un espacio entre grabaciones de la
cinta.
œ
P
L
A
Y
E
R
C
A
M
E
R
A
C
A
M
E
R
A
P
L
A
Y
E
R
1
01040F VPD963 UK+ESP~042 9/21/06 2:36 PM Page 37