Preparations for Use as a Network Scanner

Software for using a Network Delivery Scanner

 

To use the machine as a network delivery scanner, it is essential to install Scan-

 

Router V2 Lite on the delivery server. To check an in-tray or auto-receive the

 

documents, it is necessary to install DeskTopBinder V2 Lite on the client compu-

 

ter. Also, the documents can be auto-received by installing only ScanRouter V2

 

Link on the client computer.

2

Use Auto Run for installation.

Preparation

Before installing, check the operating environment for each software.⇒ p.36 “Software Supplied on CD-ROM”

A Verify that Windows is running. Insert the supplied CD-ROM labeled “Scanner Driver & Document Management Utilities” into the CD-ROM drive of the computer.

The choose setup language screen is displayed.

B Select a setup language, and then click [OK].

The CD-ROM Launcher screen is displayed.

C Click the key of the software to be installed.

The ScanRouter V2 Lite installer starts by clicking [ScanRouter V2 Lite].

The DeskTopBinder V2 Lite installer starts by clicking [DeskTopBinder V2 Lite].

The change the language screen is displayed.

Reference

For information about the subsequent installation procedure, see the Setup Guide that can be displayed from the Setup screen of the respective soft- ware.

D Select a language used by this component, and then click [OK].

The software setup screen is displayed.

34

Page 38
Image 38
Savin 1075 appendix Software for using a Network Delivery Scanner, Select a setup language, and then click OK