Delivery Procedure

HPress [OK].

The sender is displayed above

[Attach Sender’s Name].

I If required, select a subject.

Select a subject from the registered ones. ⇒ p.26 “Making Scan Data Subject Settings”

Note

When a subject has been speci- fied, this information is added to the scan data file.

When ScanRouter V2 Profes- sional is used to send docu- ments using e-mail, the subject is automatically entered as a ti- tle in the message subject.

Two methods are available for se- lecting a subject, selecting it from the list or entering it directly.

Manual input of the subject

APress [Attach Subject].

A list of registered subjects is displayed.

BPress [Manual Input].

The soft keyboard is displayed to enter a subject.

CEnter the subject with the soft keyboard.

5

When selecting a subject from the list

APress [Attach Subject].

B Select a subject.

CPress [OK].

The name of the subject is dis- played above [Attach Subject].

DPress [OK].

The name of the subject is dis- played above [Attach Subject].

J Press the {Start} key.

The original is scanned and deliv- ered to the specified destination.

Set up the original and press the {Start} key.

Note

To interrupt the scanning, press the {Clear/Stop} key or [Stop] in the displayed screen.

To use the SADF function, set up the next original. ⇒ p.44 “Placing the Divided Original in the Automatic Document Feeder (ADF)”

61

Page 65
Image 65
Savin 1075 appendix Manual input of the subject, When selecting a subject from the list, Press Attach Subject