Setting Originals
42
3
Placing the Original on the Exposure Glass
Originals which do not fit into the
ADF, such as sheets with glued-on
parts, books, etc., can be placed di-
rectly on the exposure glass for scan-
ning.
Note
For information about the origi-
nals which can be placed on the ex-
posure glass, see the Copy
Reference manual.
A
AA
ALift the exposure glass cover or
the ADF.
Note
Raise the exposure glass cover
or ADF fully (more than 30 de-
grees). The opening/closing ac-
tion triggers the automatic
original size detection process.
B
BB
BPlace the original on the exposure
glass with the side to be scanned
facing down. Align the far left
edge of the original with the
mark.
There are two original orienta-
tions. Either orientation can be
used for placement.
APlace the original so that the
top edge touches the rear of the
exposure glass.
BPlace the original so that the
top edge touches the top left of
the exposure glass.
When using the machine as a
network TWAIN scanner, this
orientation is standard setting
in the TWAIN driver. Normal-
ly, use this orientation for set-
ting.
C
CC
CClose the exposure glass cover or
the ADF.
D
DD
DSelect the original orientation ac-
cording to the setting orientation.
Reference
p.45 Original Orientation
and Scan Area Setting
ZGZY040N
ZGZY030N