Procedure for Sending E-mails
67
6
Calling up stored scan settings
APress [Recall Program].
The Recall Program screen is
displayed.
BSelect a user program of scan
settings.
CPress [OK].
The selected user program set-
tings are applied.
Making the settings individually
APress [Scan Settings].
The screen for making scan set-
tings is displayed.
BSelect resolution, original size,
and other items to change the
corresponding setting.
Scan settings are made in the
same way they are programed.
See p.18 “Setting Scanner Fea-
tures”.
CPress [OK].
The scan settings are applied.
GGG
GSelect the file type if necessary.
APress [File Type].
BSelect the file type of the file to
be attached to the e-mail from
the displayed types.
The selected file type is dis-
played under File Type.
HHH
HSelect the destination.
Four methods are available for se-
lecting a destination: selecting it
from the list, by specifying a short
ID number, by directly typing the
e-mail address, or by searching it.
Note
❒Before selecting the destination,
make sure to select [To]. When
necessary, select [Cc] or [Bcc]
and the respective destinations.
It cannot specify more than 100
destinations including [To], [Cc]
and [Bcc].
When selecting a destination
from the list
APress the title for the desired
destination. The destinations
for that title are displayed.
If the desired destination is not
displayed, press [U
UU
U] or [T
TT
T] to
display the destination.