Savin 1075 appendix When a dial-up router is connected in a network environment

Important

When the machine is connected to a network, observe the following points when setting up the machine or changing settings.

For more details, see the documentation and Help for ScanRouter V2 Lite/Pro- fessional and DeskTopBinder V2 Lite/Professional.

❖When a dial-up router is connected in a network environment

The settings for the delivery server to be connected must be made appropri- ately for the machine with ScanRouter V2 Lite/Professional, ScanRouter V2 Link, or DeskTopBinder V2 Lite/Professional. In addition, appropriately set up connected devices with the I/O settings of ScanRouter V2 Administration Utility.

If the network environment changes, make the necessary changes for the de- livery server with the machine, administration utility of client computers, ScanRouter V2 Link, and DeskTopBinder V2 Lite/Professional. Also, set the correct information for the connected device with the I/O settings of Admin- istration Utility.

Important

❒When the software is set up to connect to the delivery server via a dial-up router, the router will dial and go online whenever connection to the deliv- ery server is initiated. Telephone charges may be incurred.

❖When connected to a computer that uses dial-up access

• Do not install ScanRouter V2 Lite/Professional on a computer which uses dial-up access.

• When using ScanRouter V2 Lite/Professional, DeskTopBinder V2 Lite/Professional, ScanRouter V2 Link, or TWAIN driver on a computer with dial-up access, dial-up may be performed when connecting to the de- livery server and other equipment, depending on the setup. If the compu- ter is set up to connect to the Internet automatically, the confirmation dialog box will not appear, and telephone charges may be incurred with- out the user being aware of it. To prevent unnecessary dial-ups, the com- puter should be set up so that the confirmation dialog box is always displayed before establishing a connection. Do not make unnecessary dial- ups when using the above listed software.

❖When working in a WAN environment

In a WAN environment, do not use the ScanRouter V2 Link or other admin- istration utility installed on a client computer. In some network environ- ments, time-out may occur and normal delivery may not be possible.

❖When connected to a mail server

When the machine is connected to an SMTP server managed by an Internet service provider (hereafter called “Provider(s)”), the POP identity (POP Be- fore SMTP) may be required by the Provider. When the machine is connected to an SMTP server through a direct dial-up connection with the Provider, the POP identity (POP Before SMTP) is not required.

4