Placing the Original in the Automatic Document Feeder (ADF)

43

3
Placing the Original in the Automatic Document Feeder (ADF)
The ADF allows you to insert several
originals at one time. Originals placed
in the ADF can be scanned on one
side or both sides.

Originals that can and cannot be

placed in the ADF

For information about the origi-
nals that can and cannot be placed
in the ADF, see the Copy Reference
manual.
Attempting to use unsuitable orig-
inals in the ADF can lead to mis-
feed and damage to the original.
Place such originals directly on the
exposure glass.
Important
For information about which
original sizes can be detected
automatically and notes on
placing originals in the ADF,
see the Copy Reference manual.

A

AA
AAlign the original guide with the
original size.

B

BB
BInsert the originals with the side
to be scanned facing up. (For orig-
inals which are to be scanned on
both sides, the first side should
face up.)
There are two orientations. Either
orientation can be used for place-
ment.
Note
When using the network deliv-
ery scanner and document serv-
er, or the network TWAIN
scanner, originals with different
sizes can be placed at the same
time. Place the originals as
shown in the figure below.
Originals are scanned in the in-
serted order, starting with the
topmost page.
APlace the original so that the
top edge is in the ADF tray.
ZGZY080N
ZGZY020N