LXM32M | About this manual |
|
|
About this manual
0198441113843, V1.01, 01.2012
This manual applies to the module Modbus TCP for the product LXM32M, module identification ETH.
The information provided in this manual supplements the product manual.
Source manuals The latest versions of the manuals can be downloaded from the Inter- net at:
Source CAD data For easier engineering, CAD data (EPLAN macros or drawings) are available for download from the Internet at:
Corrections and suggestions We always try to further optimize our manuals. We welcome your sug- gestions and corrections.
Please get in touch with us by
Work steps If work steps must be performed consecutively, this sequence of steps is represented as follows:
■Special prerequisites for the following work steps ▶ Step 1
◁ Specific response to this work step ▶ Step 2
If a response to a work step is indicated, this allows you to verify that the work step has been performed correctly.
Unless otherwise stated, the individual steps must be performed in the specified sequence.
Making work easier Information on making work easier is highlighted by this symbol:
Sections highlighted this way provide supplementary information on making work easier.
Parameters In text sections, parameters are shown with the parameter name, for example _IO_act. A list of the parameters can be found in the prod- uct manual in the chapter Parameters.
SI units SI units are the original values. Converted units are shown in brackets behind the original value; they may be rounded.
Example:
Minimum conductor cross section: 1.5 mm2 (AWG 14)
Inverted signals Inverted signals are represented by an overline, for example STO_A or STO_B.
Glossary Explanations of special technical terms and abbreviations.
7 |
