![](/images/new-backgrounds/1202107/202107303x1.webp)
OVERLAPPED CASHIER ENTRY
This function allows you to switch from one cashier to another and to interrupt the first cashier’s entry. So the second cashier can do his or her entry in this mode. For actual use of this function, consult your dealer.
Example
Cashier 1: Entry started
Cashier 2: Cashier change (1 to 2), interrupt initiated
Cashier 2: Transaction finished (2)
Cashier 1: Cashier change (2 to 1), entry restart
Note
•When the cashier and clerk system is applied for your register, you cannot operate the overlapped cashier entry.
•The overlapped cashier entry is not effective while the tendering sale is going on.
•If any cashier is still making an entry (or has not finalized the transaction yet), the machine does not run in any mode other than REG and MGR and can print no X/Z reports. The error code “E22” and the corresponding cashier code(s) are displayed at this time.
Key operation |
| Comments |
1. Cashier 1 is assigned. | The entry by cashier 1 is started. |
(1‹) 100 1 360 3
3
2. Cashier 2 is assigned.
2 ‹
3 ≈
150 2
;
3. Cashier 1 is assigned.
The entry by cashier 2 is started. (The entry by cashier 1 is interrupted.)
The transaction by cashier 2 is finalized.
1‹ The entry by cashier 1 is restarted.
100 1
3603
; The transaction by cashier 1 is finalized.
150