PROGRAMMING

Your machine allows you to program in two modes: PGM1 and PGM2. The PGM1 mode is for programming

those items that need to be changed often: unit prices of departments/PLUs/EANs and percentages. The PGM2 mode is used for programming all PGM1-mode programs and those items that require less frequent changes: date, time, tax rate, and the functions of each key. We describe below the programming or setting procedures of various items.

Program every item necessary for your store following the appropriate procedures.

*To set the mode switch to the PGM1 position, use the manager or submanager key; and to set to the PGM2 position, use the manager key.

Preparations for Programming

1.Plug your machine into a standard wall outlet.

2.Put the manager or submanager key in the mode switch and turn it to the PGM1 or PGM2 position depending upon the programming you are about to do.

3.Check to see whether both journal and receipt rolls are present in the machine. If they are missing, install journal and receipt paper rolls correctly referring to the procedure in “4. Installing and removing the paper roll” under “OPERATOR MAINTENANCE”.

4.Program necessary items into your machine.

Direct Programming

1Setting the date and time

Date PGM 2

Enter the day (one or two digits), month (two digits), and year (two digits) in this sequence.

Procedure

X X X X X X =

Date (five or six digits)

Example

August 26, 2001

Key operation

 

Print

260801 =

Date

16

Page 18
Image 18
Sharp ER-A440S instruction manual Preparations for Programming, Setting the date and time Date PGM, Key operation Print