![](/images/new-backgrounds/1202107/20210767x1.webp)
Job-Code-Based Programming
This section illustrates how to program items using job codes. Using job codes allows you to program a wide variety of items in comparison with direct programming.
Start this programming by entering a corresponding job code as shown below.
2110 . ≈
All the items which can be programmed by the
” that follows job codes.
Note
When setting the parameters for a job code, the digit that is blinking is the one that can be changed. To go to the position of the parameter that you want to change, press either of the following keys :
.Moves the blinker to the right. º Moves the blinker to the left.
1Setting the date and time
Setting the date PGM 2 2610
Direct
Enter day (one or two digits), month (two digits), and year (two digits) in this sequence.
Procedure
2610 .
≈
Date (five or six digits)
;
Example | Key operation |
|
2610 . ≈
260801 ;
Date
Setting the time PGM 2 2611
Direct
Set the time using the
Procedure
2611 .
≈
Time (max. four digits)
;
32