Initialize and/or Store Settings
The current system settings can be stored, previously stored system settings can be retrieved, and the factory default system settings can be restored. Touch the [Initialize and/or Store Settings] key to configure the settings.
Restore Factory Defaults
This is used to return the system settings to the factory default settings. If you wish to create a record of the current settings before restoring the factory default settings, print the current settings using "List Print (Administrator)" (page 85) in the system settings (administrator).
After executing the reset, exit the system settings, turn
off the [POWER] key (
), wait a brief interval, and
then turn the [POWER] key (
) back on to make the factory default settings take effect.
Store Current Configuration
This is used to store the currently configured system settings. The stored settings will be retained even if the
[POWER] key ( 
) is turned off. To retrieve the stored settings, use "Restore Configuration" below.
Items not stored
• Network Settings: These are not stored as unexpected settings may cause damage to the network.
• Product Keys: Product Keys are not stored as reissue of keys may be necessary.
Restore Configuration
Use this to restore settings stored with "Store Current
Configuration".
The current settings will change to the retrieved settings.
91