Sharp MX-M200D, MX-M160D operation manual Administrator Password Number Factory Setting

✂

ADMINISTRATOR PASSWORD NUMBER: FACTORY SETTING

The following is the factory setting of the Administrator Password Number, which must be used to access the System Settings.

Factory setting = 00000

This number must be entered when accessing the System Settings for the first time. (Page 76)

•	The Administrator Password Number is an important security number allowing the Administrator to
Note	configure the copier's functions and auditor's settings.

•You should register your own code number – different from the factory setting above – immediately after your copier is installed.

•Detach this page and store it in a safe place.

101