Manuals / Sharp / Computer Equipment / All in One Printer

Sharp MX-M160D, MX-M200D operation manual Misfeed in B

Models: MX-M200D MX-M160D

1 108

Download 108 pages 18.27 Kb

Page 34

TROUBLESHOOTING AND MAINTENANCE

Misfeed in B

1 Open the front cover.

4 Lift the fusing unit release levers.

Push gently on both ends of the front cover.

2 Turn the roller rotating knob in the direction of the arrow.

Roller rotating knob

5 Close the front cover and the side cover.

The message " Clear paper path." will be cleared and copying will be possible.

	3 Lower the right and left fusing unit	•	When closing the front cover, gently hold
	release levers and remove the misfed	Note	both ends.
	paper.	•	When closing the side cover, hold the
	Fusing unit release levers Be careful not to tear the misfed		handle.
		•	If the message does not clear, check
	paper during removal.	•	If the message does not clear, check
	paper during removal.		again to make sure that no pieces of
			again to make sure that no pieces of
			paper remain.

Warning

The fusing unit is hot. Do not touch the fusing unit when removing misfed paper. Doing so may cause a burn or injury.

Caution

•Do not touch the photoconductive drum (green portion) when removing the misfed paper. Doing so may damage the drum and cause smudges on copies.

•Take care not to allow unfixed toner on the misfed paper to soil your hands or clothes.

32

Image 34

Sharp MX-M160D, MX-M200D operation manual Misfeed in B

Contents

Part 1 General Information Part 2 Copier OperationWarranty EMC this machine and peripheral devicesPart 1 General Information Trademark acknowledgments 250-sheet paper feed unit AR-D35 Product ConfigurationsMX-M200D Contents Margin shift XY zoom copyingRotation copy A Copy Erase copyFollow the cautions below when using this machine Laser Information For EuropeInstallation Requirements Environmental InformationMeaning of R in original and paper size indications Software setup guideManuals Provided with the Product Conventions used in this manualMain Features Network connection option Fax function optionEnvironment and people friendly design Part Names and Functions Side cover Document cover when installedFusing unit paper guide Open to remove misfed paper Side cover handleOperation Panel Copy Ratio key Start key / indicatorPaper Select key Auto Image keyDisplay base screen Example Copy modeOperation in COPY, PRINT, SCAN, and FAX Modes Icons appearing in the special function icon displayPower OFF Turning the Power on and OFFPower on Power save modesPaper Default settingsLoading Paper Paper that can be used for automatic 2-sided printingSpecial paper Loading PaperLoading paper in a tray Open the bypass tray EnvelopesModes Changing the Paper Size Setting of a TraySET A4R SETAuto Tray Switching Disabling Enabling Auto Tray SwitchingPaper Size SET Using Auditing Mode Auditing ModeNumber of Accounts in Auditing Mode When the copy job is finished, press the ACC.#-C keyTroubleshooting and Maintenance Troubleshooting MACHINE/COPYING ProblemsPaper is not loaded properly Selected paper sizePaper misfeed has occurred Paper misfeed Too much paper is loaded in the trayAutomatically selected or Original is curled or foldedOriginal has many solid black areas Original size is not Original is smaller than A5 5-1/2 x 8-1/2 sizeMessage Action Indicators and Display MessagesMB of expansion memory Remove the misfed original Removing MisfeedsOriginal Misfeed in the SPF Section aMisfeed in the Bypass Tray Section COpen the front cover Misfeed in the MachineMisfeed in a Close the front cover and the side coverMisfeed in B Misfeed in Tray Misfeed in CGently close the side cover Open the side cover Gently push tray 2 into the machineRemove the misfed paper 250-sheet paper feed unit AR-D35Replacing the Toner Cartridge Close the front coverChecking the Total Output Count An A3 or 11 x 17 page is counted as two pagesCleaning the Document Glass SPF/DOCUMENT Cover Cleaning the MachineCleaning the Bypass Tray Paper Feed Roller Cleaning the Transfer Charger PositionAdjust the contrast with the or key Adjusting the Display ContrastSelect Display Contrast with the or key Optional Equipment Reversing Single Pass Feeder / Single Pass Feeder SpecificationsSheet Paper Feed Unit / 2 X 250-SHEET Paper Feed Unit Store the supplies in a location that is Storage of SuppliesProper Storage Store paper in the wrapper and lying flatPart 2 Copier Operation Page Close the SPF Normal CopyingCopying from the document glass Make sure that the desired paper tray is selectedPress the Start key to begin copying Stream feeding modeCopying from the SPF Copy will be delivered toCopying books or originals with folds or creases Auto paper select modeRemoving the document cover Originals that can be used in the SPFText/photo Making a Copy Darker or LighterAuto TextImportant note when making a large number of copies Setting the Number of CopiesAuto tray switching Selecting the TrayORIG. Size Enter Selecting the Original SizeORIG. Size Enter Inch Select ORIG. Size Enter from the menu with the or keyOKORIG. Size Enter EnterExtra ExtraPress the Paper Select key to select the desired tray Reducing or Enlarging a CopyAutomatic Ratio Selection Press the Auto Image keyKey Decrease the ratio in increments of 1% Key Select a larger preset ratioKey Select a smaller preset ratio Key Increase the ratio in increments of 1%Special Function OkadjustXY Zoom XY ZoomSet the vertical ratio with the , , , or keys AdjustOFF Vertical ratio can now be selectedOriginal → Paper TWO-SIDED CopyingTWO-SIDED Copying One-sided original → Two sidesBinding Change OFF TWO-SIDED Copying of ONE-SIDED OriginalsCopy ModeCopy Mode Binding Change on Set the number of copies and press Start key Select 2 to 2 with the or key, or with the 2-SIDED Copy keyTo stop copying in the middle Copy Mode Select 2 to 1 with the or key, or with the 2-SIDED Copy keyVertically-oriented TWO-SIDED Copies Using the Bypass TrayPlace original B as shown below OriginalOkoff Dual page CopySpecial Checkmark appearsPress the Interrupt key Interrupting a Copy RUNReplace the previous originals and press the Start key Copies of multiple original pages can collated into sets Sort ModeRotating the Image 90 Degrees Sort No sortNo Sort Offset function enabled Offset function disabledSort Press the Output keyPress the Paper Select key to select the desired paper tray 1 copy layoutsPattern BorderAN Okadjust Dual Erasing Shadows around Edges of a CopyErase EdgeSelect the erasure width with the or key Card Shot Card ShotModes Card ShotFront side of the card is scanned Copies/min 2 x 11R A4, B5, A5 8-1/2 x SpecificationsCopies/min A4R 8-1/2 x 11R 25%, 50%, 64%, 77%, 95%, 100%, 121%, 129%, 141%, 200%, 400%Output tray specifications AppendixPrograms for Copy Mode Purpose of the System SettingsProgramming AN Administrator Password Programming AN Administrator Password Change Admin PWSystem Settings List Program nameSettings Using the System SettingsCopier Reset 1 ACC Auditing ModeReset Account Account ControlACC. # Control ACC. # ControlDelete Change Single ACC. Limit Cancel Jobs of Invalid AccountsAccount Limit ACC. # SecurityDevice Control Waiting Copy Lamp SettingUSB2.0 Mode Offset FunctionOperation Setting KEY Touch Sound Disable Auto KEY RepeatDisable Paper Size SET Keys Touch Sound AT Initial PointPreheat Mode Auto Power SHUT-OFFAuto Power SHUT-OFF Timer Energy SaveCopy Settings Stream Feeding Default Exposure Rotation CopySort Auto Select Disable Auto Paper Selection Resolution in AUTO/TEXT ModePhoto Mode Default Disable 2-SIDED CopyMaterial Safety Data Sheet Exposure Controls / Personal Protection Physical and Chemical Properties Ecological Information Supplier Identification Hazards Identification Physical and Chemical Properties No data are available Symbols / Numbers IndexReducing or enlarging a copy TroubleshootingNormal copying 13, 31Copying, starting TroubleshootingConvenient copy functions Two-sided copies of two-sided originals100 Administrator Password Number Factory Setting 102 103 Other Countries outside the EU Sharp Electronics Europe GmbH Sonninstraße 3, D-20097 HamburgMX-M160D/MX-M200D