CONVENIENT COPY FUNCTIONS
1 Place the originals in the document feeder tray or the first original on the document glass.
If the originals are placed in the
document feeder tray, sort
mode will be automatically
selected. This can be changed to no sort in the system settings. (Page 87)
If the first original is placed on the document glass, no sort mode will be automatically selected.
2 Press the [OUTPUT] key.
O AUTO IMAGE | OUTPUT | SORT | ||
FORMAT | ORIGINAL SIZE DUPLEX SCAN |
|
|
|
| NO SORT | |||
BROADCAST ORIGINAL SIZE DUPLEX SCAN |
| |||
|
|
|
SORT
The output mode selection screen will appear.
3 Select "NO SORT" or "SORT" with the [ ] or [] key, or with the [OUTPUT] key.
PQ
ED COPY
LEX SCAN
LEX SCAN
ACC
4 Press the [OK] key.
GHI You will return to the base
BACK OK
screen.
PQRS
6 When the START indicator lights, replace the original with the next original and press the [START] key ( ).
Repeat step 6 until all originals have been scanned.
7 When all originals have been scanned, press the [READ-END] key ( ).
•Copying will start.
•If the memory becomes full while the originals are being scanned, "Memory is full." will appear in the display. To start copying the originals that have been
scanned to that point, press the [START] key ( ). To cancel the copy job, press the [CA] key.
•The optional memory board
Offset function | 5 |
|
This function offsets each set of copies from the previous set in centre tray, making it easy to separate sets of copies. The offset function can be disabled in the system settings. (Page 82)
Offset function enabled Offset function disabled
PY AN
5
MNO
WXYZ
Select other copy settings as needed and press the [START] key ().
If you placed the originals in the document feeder tray in step 1, copying will start. If you selected "SORT" in step 3 and placed the first original on the document glass, follow steps 6 and 7. Note that if you selected "NO SORT" in step 3, copying will begin.
*This function is not available in some countries and regions.
65