Removing Misfeeds, Original Misfeed in the SPF | Sharp MX-M200D

REMOVING MISFEEDS

When a misfeed occurs during copying, the message " Clear paper path." and the location of the misfeed will appear. Check the location and remove the misfeed.

The paper may tear when you remove a misfeed. In this event, be sure to remove all torn pieces of paper from Note the machine, taking care not to touch the photoconductive drum (the green part). Any scratches or damage to the

surface of the drum will cause dirty copies.

First check the misfeed location.

										(See below)
										(See below)
(Page 31)										(Page 31)
										(Page 31)
										(Page 34)


										(Page 30)
										(Page 30)
(Page 33)										(Page 34)
(Page 33)										(Page 34)
(Page 34)										(Page 34)

Misfeed locations in the optional 2 x 250-sheet paper feed unit

(Page 34)
(Page 34)	2

* The illustration shows misfeed locations in the MX-M200D.

ORIGINAL MISFEED IN THE SPF

1 Remove the misfed original.

Check sections A, B, and C in the left shows the illustration (see the next page), and remove the misfed original.

Section A

Open the feeding roller cover and remove the misfed original from the document feeder tray. Close the feeding roller cover.

Section B

Open the SPF and rotate the two release rollers in the direction of the arrow to feed the original out. Close the SPF and then remove the original.

If the original misfeed occurred in the right roller, open the automatic document feeder and rotate the right release roller in the direction of the arrow to remove the original.

Roller

Feeding roller cover

If a small original (A5 (5-1/2" x 8-1/2"), etc.) is misfed, open the right side cover and remove the original. Close the right side cover.

Right side cover

29

Image 31

Sharp MX-M200D, MX-M160D Removing Misfeeds, Original Misfeed in the SPF, Remove the misfed original, Section a, Section B

Contents

Part 2 Copier Operation Part 1 General Information EMC this machine and peripheral devices Warranty Part 1 General Information Trademark acknowledgments 250-sheet paper feed unit AR-D35 Product ConfigurationsMX-M200D Contents A Copy Erase copy XY zoom copyingRotation copy Margin shift Follow the cautions below when using this machine For Europe Laser Information Environmental Information Installation Requirements Conventions used in this manual Software setup guideManuals Provided with the Product Meaning of R in original and paper size indications Main Features Network connection option Fax function optionEnvironment and people friendly design Part Names and Functions Side cover handle Document cover when installedFusing unit paper guide Open to remove misfed paper Side cover Operation Panel Auto Image key Start key / indicatorPaper Select key Copy Ratio key Icons appearing in the special function icon display Example Copy modeOperation in COPY, PRINT, SCAN, and FAX Modes Display base screen Power save modes Turning the Power on and OFFPower on Power OFF Paper that can be used for automatic 2-sided printing Default settingsLoading Paper Paper Special paper Loading PaperLoading paper in a tray Envelopes Open the bypass tray SET Changing the Paper Size Setting of a TraySET A4R Modes Auto Tray Switching Disabling Enabling Auto Tray SwitchingPaper Size SET When the copy job is finished, press the ACC.#-C key Auditing ModeNumber of Accounts in Auditing Mode Using Auditing Mode Troubleshooting and Maintenance MACHINE/COPYING Problems Troubleshooting Paper misfeed Too much paper is loaded in the tray Selected paper sizePaper misfeed has occurred Paper is not loaded properly Original is smaller than A5 5-1/2 x 8-1/2 size Original is curled or foldedOriginal has many solid black areas Original size is not Automatically selected or Message Action Indicators and Display MessagesMB of expansion memory Section a Removing MisfeedsOriginal Misfeed in the SPF Remove the misfed original Section C Misfeed in the Bypass Tray Close the front cover and the side cover Misfeed in the MachineMisfeed in a Open the front cover Misfeed in B Misfeed in C Misfeed in Tray 250-sheet paper feed unit AR-D35 Open the side cover Gently push tray 2 into the machineRemove the misfed paper Gently close the side cover Close the front cover Replacing the Toner Cartridge An A3 or 11 x 17 page is counted as two pages Checking the Total Output Count Cleaning the Document Glass SPF/DOCUMENT Cover Cleaning the MachineCleaning the Bypass Tray Paper Feed Roller Position Cleaning the Transfer Charger Adjust the contrast with the or key Adjusting the Display ContrastSelect Display Contrast with the or key Optional Equipment Reversing Single Pass Feeder / Single Pass Feeder SpecificationsSheet Paper Feed Unit / 2 X 250-SHEET Paper Feed Unit Store paper in the wrapper and lying flat Storage of SuppliesProper Storage Store the supplies in a location that is Part 2 Copier Operation Page Make sure that the desired paper tray is selected Normal CopyingCopying from the document glass Close the SPF Copy will be delivered to Stream feeding modeCopying from the SPF Press the Start key to begin copying Originals that can be used in the SPF Auto paper select modeRemoving the document cover Copying books or originals with folds or creases Text Making a Copy Darker or LighterAuto Text/photo Selecting the Tray Setting the Number of CopiesAuto tray switching Important note when making a large number of copies Select ORIG. Size Enter from the menu with the or key Selecting the Original SizeORIG. Size Enter Inch ORIG. Size Enter Extra EnterExtra OKORIG. Size Enter Press the Auto Image key Reducing or Enlarging a CopyAutomatic Ratio Selection Press the Paper Select key to select the desired tray Key Increase the ratio in increments of 1% Key Select a larger preset ratioKey Select a smaller preset ratio Key Decrease the ratio in increments of 1% XY Zoom OkadjustXY Zoom Special Function Vertical ratio can now be selected AdjustOFF Set the vertical ratio with the , , , or keys One-sided original → Two sides TWO-SIDED CopyingTWO-SIDED Copying Original → Paper Mode TWO-SIDED Copying of ONE-SIDED OriginalsCopy Binding Change OFF Copy Mode Binding Change on Set the number of copies and press Start key Select 2 to 2 with the or key, or with the 2-SIDED Copy keyTo stop copying in the middle Select 2 to 1 with the or key, or with the 2-SIDED Copy key Copy Mode Original TWO-SIDED Copies Using the Bypass TrayPlace original B as shown below Vertically-oriented Checkmark appears Dual page CopySpecial Okoff Press the Interrupt key Interrupting a Copy RUNReplace the previous originals and press the Start key Sort No sort Sort ModeRotating the Image 90 Degrees Copies of multiple original pages can collated into sets Press the Output key Offset function enabled Offset function disabledSort No Sort 1 copy layouts Press the Paper Select key to select the desired paper tray Border Pattern AN Okadjust Edge Erasing Shadows around Edges of a CopyErase Dual Select the erasure width with the or key Card Shot Card ShotModes Card Shot Front side of the card is scanned 25%, 50%, 64%, 77%, 95%, 100%, 121%, 129%, 141%, 200%, 400% SpecificationsCopies/min A4R 8-1/2 x 11R Copies/min 2 x 11R A4, B5, A5 8-1/2 x Appendix Output tray specifications Programs for Copy Mode Purpose of the System SettingsProgramming AN Administrator Password Change Admin PW Programming AN Administrator Password Program name System Settings List Settings Using the System SettingsCopier Account Control Auditing ModeReset Account Reset 1 ACC ACC. # Control ACC. # ControlDelete Change ACC. # Security Cancel Jobs of Invalid AccountsAccount Limit Single ACC. Limit Offset Function Waiting Copy Lamp SettingUSB2.0 Mode Device Control Operation Setting Keys Touch Sound AT Initial Point Disable Auto KEY RepeatDisable Paper Size SET KEY Touch Sound Energy Save Auto Power SHUT-OFFAuto Power SHUT-OFF Timer Preheat Mode Copy Settings Stream Feeding Default Exposure Rotation CopySort Auto Select Disable 2-SIDED Copy Resolution in AUTO/TEXT ModePhoto Mode Default Disable Auto Paper Selection Material Safety Data Sheet Exposure Controls / Personal Protection Physical and Chemical Properties Ecological Information Supplier Identification Hazards Identification Physical and Chemical Properties No data are available Index Symbols / Numbers 13, 31 TroubleshootingNormal copying Reducing or enlarging a copy Two-sided copies of two-sided originals TroubleshootingConvenient copy functions Copying, starting 100 Administrator Password Number Factory Setting 102 103 Other Countries outside the EU Sonninstraße 3, D-20097 Hamburg Sharp Electronics Europe GmbH MX-M160D/MX-M200D