Sharp MX-M200D Card Shot, Modes, Shift, Erase, Place the original on the document glass, Function

CARD SHOT

When copying a card, this function allows you to print the front and back sides of the card next to each other on a single sheet of paper.

This function creates 2 in 1 images of the front and back side of the card and centres them on the paper.

Original Copy

CARD

Front of card

Back of card

CARD

Example: Portrait A4 size

CARD

Example:

Landscape

A4 size

•Paper cannot be fed from the bypass tray.

•The card shot function cannot be used in combination with margin shift, edge erase, dual page copy, 2 in 1 / 4 in 1 copy, and XY zoom copy.

•When card shot is used, the rotation copy function does not operate.

1 Place the original on the document glass.

2 Press the [SPECIAL FUNCTION] key.

ON LINE		SPECIAL	FUNCTION
DATA	SPECIAL
	FUNCTION	SPECIAL	MODES
		ORIG. SIZE		ENTER
LINE	COPY EXPOSURE PAPER SE	PAPER SIZE		SET
DATA	SCAN COLOUR MODE RESOLUT	DISPLAY	CONTRAST
The special function
screen will appear.
3 Press the [OK] key.
BACK	GHI	SPECIAL	MODES
	OK
	PQRS	MARGIN		SHIFT
		ERASE
PY		DUAL	PAGE COPY

AN	[OK]:ADJUST
The special modes
screen will appear.

4 Select "CARD SHOT" with the [] or [ ] key.

PQ	SPECIAL MODES
	2in1/4in1
ED COPY	XY ZOOM
LEX SCAN	CARD SHOT
LEX SCAN
ACC	[OK]:ADJUST

5 Press the [OK] key.

OK	CARD	SHOT
	SIZE(mm)
	X:	86
	Y:	54

The card shot screen appears.

The default values for the length and width	5
Note that initially appear when this screen is

displayed can be set "CARD SHOT DEFAULT" (page 86) in the system settings.

6 Select "X" (width) with the [ ] or [ ] key and enter the width with the [] or [] key, and then do the same for the length (Y).

CARD SHOT

SIZE(mm)

X: 100

Y: 100

Any number from 25 mm to 210 mm (1" to Note 8-1/2") can be entered for the width, and any

number from 25 mm to 210 mm (1" to 8-1/2") can be entered for the length.

7 Press the [OK] key.

OK	You will return to the base
	screen.

71