Sharp MX-M200D Two-Sided Copies Using The Bypass Tray, Copy original A, Vertically-oriented

TWO-SIDED COPIES USING THE BYPASS TRAY

Follow the steps below to perform two-sided copying manually.

Example: Copying original A and original B onto both sides of the paper

1

2

1

This Machine is equipped standard with an automatic two-sided copying function that automatically turns over the paper. If paper in "Paper that can be used for automatic 2-sided printing" on page 18 is used, this enables easier two-sided copying than using the bypass tray. See "TWO-SIDED COPYING" on page 56.

1 Copy original A.

3 Turn the copy of original A over, and without changing the position of the edge closest to you, insert it in the bypass tray.

1

1

Insert the paper all the way in.

Copy of original A

1

Copy of original A

Original A

1

Original A

1 2

Original B

1

2

Original B

1	4
Copy of
original A

1

Copy of original A

2 Place original B as shown below.

	Vertically-oriented
	original:
2	If the original is oriented
	vertically, place it in the
	same orientation as
Original B	original A.

	Horizontally-oriented
	original:
2	Place in the opposite
	orientation (rotated 180
	degrees) to that of
Original B	original A.

• Copies made on the back side of paper

Note should always be made one sheet at a

time using the bypass tray.

•Straighten curled or wavy paper before using it. Curled paper may cause misfeeds, creases, or a poor-quality image.

4 Select the bypass tray with the [PAPER SELECT] key and then press the [START] key ( ).

The copies are delivered to the centre tray.

61